Table of Contents
Advertisement
Dakota Ultrasonics
3) Press the
ELONG is displayed.
4) Press the
times to tab left, until the MATL menu is highlighted and displaying the
submenu items.
5) Press the
menu items until TYPE is highlighted.
6) Press the
7) Press the
material list until the appropriate material type is highlighted.
Note: If the material type is not in the list of types, select a similar type. This
step is only to get the velocity value in a close proximity – not critical. Write
down the velocity of the material type selected. This will be considered
the Current Velocity.
8) Press the
9) Press the
to cancel selecting the material type.
and
arrow keys multiple times to scroll the quantity until
key multiple times to tab right, and the
and
arrow keys multiple times to scroll through the sub
key to display the list of bolt material types.
and
arrow keys multiple times to scroll through the
key to display the confirmation screen.
key to select the type and return to the menu screen, or
96
key multiple
Advertisement
Table of Contents
