DAKOTA ULTRASONICS MiniMax v2.0 Operation Manual page 151

1) Press the
key multiple times to move right and the
until the ALEN cell is highlighted.
2) Press the
3) Press the
value.
4) Press the
locations.
5) Repeat steps 3 & 4 until the ALEN value is correctly displayed.
6) Press the
entering the ALEN.
The user can also access and set the approximate length from the tabbed menus.
However, this method is more tedious than making the adjustments using the Hot
Menus. The procedure using the tabbed menus is outlined below:
Setting the Approximate Length using the Tabbed Menus
1) Press the
multiple times to tab right, and the
AUTO menu is highlighted and displaying the submenu items.
key once to activate measure menu items. Press the
key to display the Digits Edit Box.
and arrow keys multiple times to scroll the highlighted
and arrow keys multiple times to scroll the digit
key to return to the measurement screen, or
key once to activate the menu items tab. Press the
MiniMax Bolt Tension Monitor
key multiple times to move left,
key multiple times to tab left, until the
145
to cancel
key