Table of Contents
Advertisement
Dakota Ultrasonics
23) Press the
and should be documented and scribed on the bolt, along with the Velocity
and Temperature Coefficient, for future zero verification.
24) Proceed to the next section to save this length in the zero group CAL
DATA created in a previous section. DO NOT REMOVE THE
TRANSDUCER FROM THE BOLT.
Now that we've gathered all the data for the probe zero bolt, we need to document it
as outlined in the next section.
1) Press the
key multiple times to move right and the
until the LOG cell is highlighted.
2) Press the
3) Press the
the desired storage location.
Note: The first column A must be used to store reference lengths.
4) Press the
location.
5) Abort the Grid View Box by pressing the
key and the Ultrasonic Length of the bolt will be displayed
Storing the Reference Length
key once to activate measure menu items. Press the
key to display the Group View Box.
arrow keys to scroll the target cell cursor to
key to save the current reading in the highlighted cell
key multiple times to move left
key at any time.
66
Advertisement
Table of Contents
