DAKOTA ULTRASONICS MiniMax v2.0 Operation Manual page 143

1) Press the
key multiple times to move right and the
until the GATE cell is highlighted.
2) Press the
value.
3) Alternatively, press the
4) Press the
value.
5) Press the
locations.
6) Repeat steps 4 & 5 until the GATE value is correctly displayed.
7) Press the
adjusting the GATE start value.
The user can also access and adjust the gate from the tabbed menus. However, this
method is more tedious than making the adjustments using the Hot Menus. The
procedure using the tabbed menus is outlined below:
Adjusting the Gate using the Tabbed menus
key once to activate measure menu items. Press the
and arrow keys multiple times to scroll the highlighted
key to display the Digits Edit Box.
and arrow keys multiple times to scroll the highlighted
and arrow keys multiple times to scroll the digit
key to return to the measurement screen, or
MiniMax Bolt Tension Monitor
key multiple times to move left
137
to cancel