DAKOTA ULTRASONICS MiniMax v2.0 Operation Manual page 62

Dakota Ultrasonics
5) Press the
6) Press the
AUTO list until PHY LENGTH is highlighted.
Note: PHY LENGTH is the actual physical length of the calibration standard.
7) Press the
8) Press the
value.
9) Press the
locations.
10) Repeat steps 8 & 9 until the PHY LENGTH value is correctly displayed.
11) Press the
PHY LENGTH.
12) Press the
AUTO list until TEMP COEF is highlighted.
13) Press the
14) Press the
value.
key to display the AUTO list box.
and arrow keys multiple times to scroll through the
key to display the Digits Edit Box.
and arrow keys multiple times to scroll the highlighted
and arrow keys multiple times to scroll the digit
key to return to the AUTO list, or
and arrow keys multiple times to scroll through the
key to display the Digits Edit Box.
and arrow keys multiple times to scroll the highlighted
to cancel entering the
56