Table of Contents
Advertisement
Dakota Ultrasonics
Note: The default setup, selected in the previous section, automatically
defaults to English units – inches. Follow the procedure below to change the
units to Metric, if needed.
1) Press the
to tab left until the MATL menu is highlighted and displaying the submenu
items.
2) Use the
UNITS is highlighted.
3) Press the
(inches), IN HR (inches hi resolution), MM (millimeters), and MM HR
(millimeters hi resolution).
Note: The high-resolution options display an additional digit of resolution to the
measurement. This mode is typically used when measuring very short bolts
with very little elongation.
This section allows the user the ability to select a material from a list of preset
material types. Keep in mind that we are measuring elongation only. If your
material is not in the list, select a similar material type. When measuring in
key multiple times to tab right and the
and
arrow keys to scroll through the sub menu items until
and
arrow keys to scroll through the unit options IN
Selecting the Material Type
10
key multiple times
Advertisement
Table of Contents
