MiniMax Bolt Tension Monitor
4.16 ESC Key
The ESC key is used in the MENU, MEAS, and EDIT functions as a back or escape
key. If the MiniMax is displaying a group file, the OK key toggles the display view
options: Digits, RF, RECT views.
4.17 Arrow Keys
The Arrow Keys are used to navigate through the menus, increase/decrease values,
and toggle specific function keys.
4.18 ENTER key
The ENTER key is used in the overall menu selection process, to activate list and
edit boxes, display and save measurements to a group file location.
4.19 AUTO SET Key
The AUTO SET is an automatic measurement routine that attempts to locate the
detection and set all the scope parameters of the MiniMax.
4.20 ON/OFF Key
The ON/OFF key simply powers the unit either ON or OFF. Note: Unit will
automatically power off when idle for 5 minutes. All current settings are automatically
saved prior to powering off.
4.21 Navigating the Hot Menu
35