Using with an analog video
unit and your computer
– Signal convert function
You can capture images and sound from an
analog video unit connected to your computer
which has the i.LINK (DV) jack via your VCR.
(1) Set the POWER switch to ON.
(2) Press MENU to display the menu setting.
(3) Turn the SEL/PUSH EXEC dial to select
then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select
A/V t DV OUT, then press the dial.
(5) Start playback on the analog video unit.
(6) Start capturing procedures on your
computer.
The operation procedures depend on your
computer and the software which you use.
For details on how to capture images, refer to
the instruction manual of your computer and
software.
S video cable (optional)/
AUDIO/VIDEO INPUT
OUT
S VIDEO
VIDEO
AUDIO
Other VCR/
: Signal flow/
After capturing images and sound
Stop capturing procedures on your computer,
and stop the playback on the analog video unit.
88
,
S VIDEO IN
A/V connecting
A/V converting cable
cable (supplied)/
(supplied)/
(1)
(2)
(3)
(4)
t
(5)
(6)
DV
i.LINK cable (DV connecting
cable) (optional)/
i.LINK