Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual page 85

Dubbing only desired scenes
– Digital program editing (on
tapes)
Erasing the program you have set
Erase OUT first and then IN from the last
program.
(1) Turn the SEL/PUSH EXEC dial to select
UNDO, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial.
The last set program mark flashes, then the
setting is canceled.
To cancel erasing
Select RETURN in step 2, then press the dial.
Erasing all programs
(1) Select VIDEO EDIT in the menu settings.
(2) Turn the SEL/PUSH EXEC dial to select
TAPE, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select
ERASE ALL, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial.
All the program marks flash, then the
settings are canceled.
To cancel erasing all programs
Select RETURN in step 4, then press the dial.
To cancel a program you have set
Press MENU.
The program is stored in memory until the tape
is ejected.
Note
You cannot operate recording during Digital
program editing.
On a blank portion of the tape
You cannot set IN or OUT on a blank portion of
the tape.
If there is a blank portion between IN and
OUT on the tape
The total time code may not be displayed
correctly.
(1)
(2)
(1)
(2)
(3)
(4)
85