Making Your Own Titles - Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual

Making your own titles

You can make up to two titles and store them in
your VCR. Each title can have up to 20
characters.
(1) Press MENU to display the menu settings.
(2)
Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select
TITLE, then press the dial.
(4)
Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(5)
Turn the SEL/PUSH EXEC dial to select
CUSTOM1 SET or CUSTOM2 SET, then
press the dial.
(6) Turn the SEL/PUSH EXEC dial to select the
column of the desired character, then press
the dial.
(7) Turn the SEL/PUSH EXEC dial to select the
desired character, then press the dial.
(8) Repeat steps 6 and 7 until you have selected
all characters and completed the title.
(9) To finish making your own titles, turn the
SEL/PUSH EXEC dial to select [SET], then
press the dial. The title is stored in memory.
(10) Press MENU to make the menu settings
disappear.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
49