Superimposing a title
If you use a tape with cassette memory,
you can superimpose the title. When you
play back the tape, the title is displayed
for five seconds from the point where you
superimposed it.
You can select one of eight preset titles and two
custom titles (p. 49). You can also select the color,
size and position of titles.
(1) Press MENU in the playback, playback pause
mode or record pause mode.
(2) Turn the SEL/PUSH EXEC dial to select
then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select
TITLE, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select
then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select the
desired title, then press the dial. The titles are
displayed in the language you selected.
(6) Change the color, size, or position, if
necessary.
1 Turn the SEL/PUSH EXEC dial to select
the COLOR (COLOUR), SIZE, or
POSITION, then press the dial. The item
appears.
2 Turn the SEL/PUSH EXEC dial to select
the desired item, then press the dial.
3 Repeat steps 1 and 2 until the title is laid
out as desired.
(7) Press the SEL/PUSH EXEC dial to complete
the setting.
In the playback or playback pause mode:
The TITLE SAVE indicator appears on the
screen for five seconds and the title is set.
In the recording pause mode:
The TITLE indicator appears. And when you
press X to start recording, TITLE SAVE
appears on the screen for five seconds and
the title is set.
44
VACATION
(1)
,
(2)
(3)
,
(4)
(5)
(6)
1
2
3
(7)
1
2
X
Need help?
Do you have a question about the GV-D1000 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers