Installing The Usb Driver - Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual

Viewing images recorded on
tapes on your computer
(Windows user only)

Installing the USB driver

Before connecting your VCR to your computer,
install the USB driver to the computer. The USB
driver is contained together with application
software for viewing images on the CD-ROM
supplied with your VCR.
Be sure to follow the steps before
connecting the USB cable to your
computer.
Connect the USB cable in step 8.
If the USB driver has been registered
incorrectly because your computer was
connected to your VCR before the installing
the USB driver, reinstall the USB driver
following the procedure on page 100.
For Windows 98SE, Windows Me, Windows
2000 Professional, Windows XP users.
Log in with permission of Administrator. (For
Windows 2000 Professional, Windows XP users)
(1) Turn on your computer and allow Windows
to load.
(2) Insert the supplied CD-ROM into the CD-
ROM drive of your computer. The
application software screen appears.
(3) Set the cursor on "USB Driver" and click. The
USB driver installation starts.
98
(1)
(2)
(3)