Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual page 157

Viewing images recorded on
"Memory Stick"s on your
computer
For Macintosh users
Recommended Macintosh environment
OS: Mac OS 8.5.1/8.6/9.0/9.1/9.2 or Mac OS X
(v10.0/v10.1) standard installation is required.
However, note that the update to Mac OS 9.0/9.1
should be used for the following models.
•iMac with the Mac OS 8.6 standard installation
and a slot loading type CD-ROM drive
•iBook or Power Mac G4 with the Mac OS 8.6
standard installation
The USB connector must be provided as
standard.
Installing the USB driver
Before connecting your VCR to your computer,
install the USB driver to the computer. The USB
driver is contained together with CD-ROM
which is supplied with your VCR.
For Mac OS 9.1/9.2/Mac OS X (v10.0/v10.1)
users
The USB driver needs not be installed. Your Mac
is automatically recognized as a driver just by
connecting your Mac using the USB cable.
Set the USB MODE switch to
STICK). (The default setting is VCR.)
For Mac OS 8.5.1/8.6/9.0 users
(1) Turn on the power of your computer and
allow the Mac OS to load.
(2) Insert the supplied CD-ROM in the CD-ROM
drive of your computer.
The application software screen appears.
(3) Double click the "Setup menu" icon.
The menu appears.
(MEMORY
(1)
(2)
(3)
157