Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual page 86

Dubbing only desired scenes
– Digital program editing (on
tapes)
Operation 2: Performing a
Digital program editing
(dubbing a tape)
Make sure your VCR and the other VCR are
connected, and that the other VCR is set to
recording pause. When you use the i.LINK cable
(DV connecting cable) this procedure are not
necessary.
When you use a camcorder, set its power switch
to VCR.
(1) Select VIDEO EDIT in
setting.
(2) Turn the SEL/PUSH EXEC to select TAPE,
then press the dial.
(3) Turn the SEL/PUSH EXEC to select START,
then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial.
Search for the beginning of the first scene,
then start dubbing.
The program mark flashes.
The SEARCH indicator appears during
search on the screen.
The program indicator changes to light blue
after the dubbing is complete.
When the dubbing ends, both your
(playback) VCR and the other (recording)
VCR automatically stop.
To stop dubbing during editing
Press x using the video operation buttons.
To end the Digital program editing
function
Your (play back) VCR stops when the dubbing
ends. Then the display returns to VIDEO EDIT in
the menu settings.
Press MENU to end the digital program editing
function.
86
in the menu
(1)
(2)
(3)
(4)
x