Date Search - Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual

Searching a recording by date

– Date search

Searching for the date without
using cassette memory
(1) Set the POWER switch to ON.
(2) Press MENU to display the menu settings.
(3) Turn the SEL/PUSH EXEC dial to select
then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select
CM SEARCH to OFF, then press the dial.
(5) Press SEARCH MODE on the Remote
Commander repeatedly until the DATE
SEARCH indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH
no indicator
(6) Press . on the Remote Commander to
search for the previous date or press > on
the Remote Commander to search for the
next date. Your VCR automatically starts
playback at the point where the date changes.
Each time you press . or >, your VCR
searches for the previous or next date.
To stop searching
Press x.
60
T PHOTO SCAN
(1)
(2)
,
(3)
(4)
(5)
(6)
t
T
.
. >
x
>