Table of Contents
Advertisement
Notes
When connecting the VCRs,
do not connect both LINE IN
and LINE OUT jacks on your
VCRs simultaneously. Doing
so may Cause a humming
noise.
If your playback VCR is a
monaural unit, connect the
white plug to LINE IN 2
AUDIO L on this VCR. This
lets you record the sound of
the playback VCR on both
channels of this VCR. Do not
connect any plug to LINE IN
2 AUDIO R.
If another VCR has both the
LANC connector and the
CONTROL S connector, use
the LANC connector. Do not
make the LANC and
CONTROL S connections
simultaneously.
When connecting with a
video camera recorder such
as CCD-V801, you can take
advantage of more precise
synchronized editing
function.
68
Synchronized Editing
Connecting Video Equipment with the
LANC connector
When using the rear panel jacks
This VCR (Recorder)
MONITOR OUT
Another VCR (Player)
LINE IN 1
VIDEO
(Yellow)
AUDIO L (White)
AUDIO R (Red)
VIDEO OUT
(Yellow)
AUDIO L OUT (White)
AUDIO R OUT (Red)
Supplied audio/video cable
(not suppied)
—
'Signal flow
When using the front panel jacks
fo
=
This VCR (Recorder)
CONTROL L
'= (Stereo
mini-mini plug)
Supplied
control cable
Pim
CONTROL
L
VIDEO OUT
(Yellow)
LINE IN 2
AUDIO R OUT]
(Red)
AUDIO L (White)
AUDIO R (Red)
Supplied audio/video cable
on
oN : Signal flow
About the © (LANC)
LANC stands for Local Application Control System.
The LANC connector is used for controlling the tape transport of video equipment
and peripherals connected to it. This connector has the same function as the
connectors indicated as CONTROL L or REMOTE.
Advertisement
Table of Contents
