Editing; Dubbing A Tape - Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable
You can dub or edit on another VCR connected
to your VCR using your VCR as a player.
Connect your VCR to the other (recording) VCR
using the A/V connecting cable supplied with
your VCR.
Before operation
•Set DISPLAY to LCD in the menu settings. (The
default setting is LCD.)
•Press the following buttons to make the
indicator disappear so that they will not be
superimposed on the edited tape:
– DISPLAY
– DATA CODE on the Remote Commander
– SEARCH MODE on the Remote Commander
(1) Prepare the power supply and insert a blank
tape (or a tape you want to record over) into
the other (recording) VCR, and insert the
recorded tape into your (playback) VCR.
(2) Set the input selector on the other (recording)
VCR to LINE. Connect the A/V connecting
cable to AUDIO/VIDEO jack.
Refer to the operating instructions of the other
(recording) VCR.
(3) Set the POWER switch to ON.
(4) Press H PLAY to play back the recorded
tape on your (playback) VCR.
(5) Start recording on the other (recording) VCR.
For details, refer to the operating instructions
of the other (recording) VCR.
: Signal flow/
S video cable (optional)/
S VIDEO OUT
AUDIO OUT
VIDEO OUT
A/V connecting cable (supplied)/
(1)
(2)
(3)
(4) H
(5)
IN
S VIDEO
VIDEO
AUDIO
67