Using With An Analogue Video Unit And A Personal Computer - Signal Convert Function - Sony GV-D200E Operating Instructions Manual

Using with an analogue video
unit and a personal computer
– Signal convert function
You can convert analogue video signals into
digital video signals via your VCR connect to a
personal computer and analogue video unit.
Capturing images and sound
from an analogue video unit
Analogue video signals t Digital
video signals
(1) Set the POWER switch to ON.
(2) Set A/V t DV OUT to ON in
menu settings (p. 67).
"A/V t DV" appears on the monitor
screen.
(3) Start playback on the analogue video unit.
(4) Start capturing procedures on your personal
computer.
The operation procedures depend on your
personal computer and the software which
you use.
For details on how to capture images, refer to
the instruction manual of your personal
computer and software.
S video cable
(not supplied)/
OUT
S VIDEO
VIDEO
AUDIO
Other VCR/
: Signal flow/
After capturing images and sound
Stop capturing procedures on your personal
computer, and stop the playback on the analogue
video unit.
62
in the
AUDIO/VIDEO
INPUT
S VIDEO IN
A/V connecting
cable (supplied)/
DV IN/
OUT
A/V converting
cable (supplied)/
t
t
t
i.LINK
DV IN/
OUT
i.LINK cable (DV connecting cable)
(not supplied)/