Recording edited pictures as a
moving picture – Digital program
editing (on "Memory Stick"s)
Erasing all programs
(1) Select and decide upon VIDEO EDIT, then
select and decide upon MEMORY with the
SEL/PUSH EXEC dial.
(2) Select and decide upon ERASE ALL, then
select and decide upon EXECUTE with the
SEL/PUSH EXEC dial.
All the program marks flash, then the
settings are canceled.
To cancel erasing of all programs
Select and decide upon RETURN with the SEL/
PUSH EXEC dial in step 2.
To cancel a program you have set
Press MENU.
The program is stored in memory until the tape
is ejected.
Notes
•You cannot dub the titles, display indicators, or
the contents of cassette memory.
•You cannot operate recording during the digital
program editing on "Memory Stick"s.
•You cannot set IN or OUT on a blank portion of
the tape.
•If there is a blank portion between IN and OUT
on the tape, the total time code may not be
displayed correctly.
While making a program
If you eject the cassette, NOT READY appears on
the screen. The program will be erased.
If you set over the maximum recording time
The program mark changes to yellow, and OVER
15 SEC LIMIT appears when IMAGE SIZE is set
to 320 240, or OVER 60 SEC LIMIT appears
when IMAGE SIZE is set to 160
you can record up to the maximum recording
time.
(1)
(2)
112. However,
137
Need help?
Do you have a question about the GV-D1000 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers