Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual page 100

Viewing images recorded on
tapes on your computer
(Windows user only)
If you cannot install the USB driver
The USB driver has been registered incorrectly as
your computer was connected to your VCR
before installing the USB driver. Perform the
following procedure to correctly install the USB
driver.
Step 1 Uninstall the incorrect USB
driver
1 Turn on your computer and allow Windows
to load.
2 Connect the
USB connector on your computer using the
USB cable supplied with your VCR.
3 Connect the AC power adaptor, and set the
POWER switch to ON.
4 Open your computer's "Device Manager."
Windows XP:
Select "Start" t "Control Panel" t
"System" t "Hardware" tab, and click the
"Device Manager" button.
If there is no "System" inside "Pick a
Category" after clicking "Control Panel",
click "Switch to Classic View" instead.
Windows 2000 Professional:
Select "My Computer" t "Control Panel"
t "System" t "Hardware" tab, and click
the "Device Manager" button.
Windows 98 SE/Windows Me:
Select "My Computer" t "Control Panel"
t "System," and click the "Device
Manager" tab.
100
(USB) jack on your VCR to the
USB connector/
USB cable (supplied)/
1
2
(USB) jack/
3
4
t
t
t
t
t
t
t
t