Copying the image
recorded on "Memory
Stick"s to tapes
You can copy images recorded on a "Memory
Stick" and record them to a tape.
Before operation
•Insert a tape for recording into your VCR.
•Insert a "Memory Stick" into your VCR.
(1) Set the POWER switch to ON.
(2) Using the video control buttons, search a
point where you want to record the desired
images. Set the tape to playback pause.
(3) Press REC and the button on its right
simultaneously on your VCR. The tape is set
to the recording pause mode.
(4) Press MEMORY PLAY. The last recorded
image is displayed.
(5) Press MEMORY +/– to select the desired
image. To see the previous image, press
MEMORY –. To see the next, press MEMORY
+.
(6) Press X to start recording and press X again
to stop.
z appears on the screen during recording.
(7) If you have more to copy, repeat steps 5 and
6.
To stop copying in the middle
Press x.
162
(1)
(2)
(3)
(4)
(5)
(6)
X
(7)
4
PLAY
3
REC
X
z
x
Need help?
Do you have a question about the GV-D1000 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers