Basic Operations; Playing Back A Tape - Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual

— Basic Operations —

Playing back a tape

You can control playback using the Remote
Commander supplied with your VCR.
Set COMMANDER to VTR 2 in the menu
settings. (The default setting is VTR 2.)
(1) Prepare the power supply and insert a
cassette to play back.
(2) While pressing the small green button on the
POWER switch, set it to ON.
The POWER ON/CHARGE lamp (green) on
the front lights up.
(3) Press H to start playback.
(4) Adjust the brightness using LCD BRIGHT.
(5) Adjust the volume using VOLUME.
DISPLAY
To stop playback
Press x.
(1)
(2)
(3) H
(4)
(5)
4
2
OFF(CHG)
POWER
3
5
x
LCD
BRIGHT
ON
PLAY
REW FF
STOP
VOLUME
23