Recording edited pictures as a
moving picture – Digital program
editing (on "Memory Stick"s)
You can duplicate selected scenes (programs) for
editing onto "Memory Stick"s.
Making the program
(1) Set the POWER switch to ON.
(2) Insert the tape for playback, and a "Memory
Stick" for recording into your VCR.
(3) Press MENU, then select and decide upon
VIDEO EDIT in
EXEC dial (p. 112).
(4) Select and decide upon MEMORY with the
SEL/PUSH EXEC dial.
(5) Select and decide upon IMAGE SIZE with
the SEL/PUSH EXEC dial.
When IMAGE SIZE is set to 320 240, the
maximum recording time is 15 seconds.
However, when IMAGE SIZE is set to 160
112, the maximum recording time is 60
seconds.
(6) Search for the beginning of the first scene
you want to insert using the video operation
buttons, then press X to suspend playback
momentarily.
You can fine-adjust one frame at a time with
c
or
C.
(7) Turn the SEL/PUSH EXEC dial to select
MARK, then press the dial, or press MARK
on the Remote Commander.
The IN point of the first program is set, and
the top part of the program mark changes to
light blue.
(8) Search for the end of the first scene you
want to insert using the video operation
buttons, then press X to suspend playback
momentarily.
(9) Turn the SEL/PUSH EXEC dial to select
MARK, then press the dial, or press MARK
on the Remote Commander.
The OUT point of the first program is set,
then the bottom part of the program mark
changes to light blue.
(10) Repeat steps 6 to 9, then set the program.
When one program is set, the program mark
changes to light blue.
You can set a maximam of 20 programs.
with the SEL/PUSH
(1)
(2)
(3)
(4)
(5)
(6)
X
C
(7)
(8)
X
(9)
(10)
c
135
Need help?
Do you have a question about the GV-D1000 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers