Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual page 73

Dubbing only desired scenes
– Digital program editing (on
tapes)
Setting the IR SETUP code
(1) Set the POWER switch to ON on your
(playback) VCR.
(2) Turn the power of the other (recording) VCR
on, then set the input selector to LINE.
When you connect a digital video camera
recorder, set its POWER switch to VCR/
VTR.
(3) Press MENU to display the menu settings.
(4) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select
VIDEO EDIT, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select
TAPE, then press the dial.
(7) Turn the SEL/PUSH EXEC dial to select
EDIT SET, then press the dial.
(8) Turn the SEL/PUSH EXEC dial to select
CONTROL, then press the dial.
(9) Turn the SEL/PUSH EXEC dial to select IR,
then press the dial.
(10) Turn the SEL/PUSH EXEC dial to select IR
SETUP, then press the dial.
(11) Turn the SEL/PUSH EXEC dial to select the
IR SETUP code of the other (recording) VCR
(p. 75, 76), then press the dial.
73