Recording a picture
from a tape as a
moving picture
Your VCR can read moving picture data
recorded on a tape and record it as a moving
picture on a "Memory Stick." Your VCR can also
take in moving picture data through the input
connector and record it as a moving picture on a
"Memory Stick."
Before operation
•Insert a recorded tape into your VCR.
•Insert a "Memory Stick" into your VCR.
(1) Set the POWER switch to ON.
(2) Press H. The picture recorded on the tape is
played back.
And press X at the scene where you want to
start recording from.
(3) Press MEMORY CAPTURE – MPEG on your
VCR or START/STOP on the Remote
commander. When IMAGESIZE in the menu
settings is set to 320 × 240, the maximum
recording time is 15 seconds. However, when
IMAGESIZE in the menu settings is set to 160
× 112, the maximum recording time is 60
seconds.
2
To stop recording
Press MEMORY CAPTURE – MPEG.
PAUSE
PLAY
Зaпиcь изобpaжeния c
кacceты кaк подвижного
изобpaжeния
Пepeд нaчaлом paботы
(1)
(2)
(3)
3
min
4 0
BBB
[a]: Recording time can be recorded on the
"Memory Stick."/
[b]: This indicator is displayed for five seconds
after pressing MEMORY CAPTURE - MPEG
on your VCR or START/STOP on the
Remote Commander. This indicator is not
recorded./
Для оcтaновки зaпиcи
H
X
×
×
N
0 : 1 5 : 4 2 : 4 3
0 : 0 3
REC
320
[ 1 5
]
SEC
[a]
[b]
131
Need help?
Do you have a question about the GV-D1000 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers