Searching A Recording By Date - Date Search - Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual

Searching a recording
by date – Date search
You can automatically search for the point where
the recording date recorded by the camcorder
changes and start playback from that point (Date
search). Use a tape with cassette memory for
convenience. Use the Remote Commander for
this operation.
Use this function to check where recording dates
change or to edit the tape at each recording date.
Searching for the date by using
cassette memory
Before operation
•You can use this function only when playing
back a tape with cassette memory.
•Set CM SEARCH to ON in the menu settings.
(The default setting is ON).
(1) Set the POWER switch to ON.
(2) Press SEARCH MODE on the Remote
Commander repeatedly, until the DATE
SEARCH indicator appears.
The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t
PHOTO SEARCH t PHOTO SCAN t
no indicator
(3) Press . or > on the Remote Commander
to select the date for playback.
Your VCR automatically starts playback at the
beginning of the selected date.
58
(1)
(2)
(3)
t t
t t
. >