Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual page 105

Viewing images recorded on
tapes on your computer
(Windows user only)
(1) Click
.
(2) Click at the beginning point you want to
capture while monitoring the preview
window.
(3) Click
at the ending point you want to
capture while monitoring the preview
window.
The moving picture is captured.
The captured image appears on the
thumbnail list windows.
Notes
•When you view images using your computer
with the USB connection, the following
conditions may occur, but do not indicate
malfunction:
– The image may fluctuate.
– The image may contain noise, etc.
– The image does not appear properly if the
image signal is of a different TV colour system
from your VCR.
•Indicators in the VCR screen do not appear on
images that are captured into your computer.
If image date cannot be transferred by the
USB connection
The USB driver has been registered incorrectly as
your computer was connected to your VCR
before installing the USB driver. Perform the
following procedure to correctly install the USB
driver (p. 98).
If any trouble occurs
Close all running applications, then restart it.
Carry out the following operations after
quitting the application:
– Disconnect the USB cable
– Turn on/off the power
– Change the USB MODE switch
Пpоcмотp изобpaжeний, зaпиcaнныx
нa кacceты, c помощью компьютepa
(только для пользовaтeлeй Windows)
(1)
(2)
(3)
Пpимeчaния
Ecли нeвозможно пepeдaть дaнныe
изобpaжeния по cоeдинeнию USB
Пpи возникновeнии пpоблeм
Поcлe зaкpытия пpиложeния выполнитe
cлeдyющиe опepaции:
105