Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual page 39

Playing back a tape with digital
effects
(1) Press MENU in the playback or playback
pause mode.
(2) Turn the SEL/PUSH EXEC dial to select
then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select D
EFFECT, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the
desired digital effect mode.
The bars appear. In the STILL and LUMI.
modes, the still image is stored in memory.
(5) Turn the SEL/PUSH EXEC dial to adjust the
effect as follows:
STILL – The rate of the still image you want
to superimpose on the moving
image
FLASH – The interval of flash motion
LUMI. – The color scheme of the area in the
still image which is to be masked
with a moving image
TRAIL – The vanishing time of the
incidental image
The number of bars on the screen increases as
the degree of effect increases.
(1)
,
(2)
(3)
(4)
(5)
1
MENU
2,3
VCR SET
P EFFECT
D EFFECT OFF
HiFi SOUND
AUDIO MIX
A/V DV OUT
RETURN
[ MENU ] : END
4,5
VCR SET
D EFFECT
OFF
STILL
FLASH
LUMI
TRAIL
[ MENU ] : END
VCR SET
P EFFECT
D EFFECT
HiFi SOUND
AUDIO MIX
A/V DV OUT
[ MENU ] : END
VCR SET
D EFFECT
OFF
STILL
FLASH
LUMI.
TRAIL
[ MENU ] : END
VCR SET
D EFFECT
STILL
• • • • • • • • • •
[ MENU ] : END
39