To display the screen indicators
– Display function
To display the date/time and
various settings
Use the Remote Commander for this
operation
Your VCR automatically records not only images
on the tape but also the recording data (date/
time or various settings when recorded) (Data
code).
1 Set the POWER switch to ON, then play
back a tape.
2 Press DATA CODE on the Remote
Commander.
The display changes as follows:
date/time t various settings (SteadyShot,
exposure, white balance, gain, shutter speed,
aperture value) t no indicator
[a] SteadyShot OFF
[b]Exposure mode
[c] White balance
[d]Gain
[e] Shutter speed
[f] Aperture value
Not to display various settings
Set DATA CODE to DATE in the menu settings
(p. 112).
The display changes as follows when you press
DATA CODE on the Remote Commander: date/
time y no indicator
Date/time/
JUL 4 2002
12:05:56 AM
1
2
t
Various settings/
AUTO
50 AWB
F1.8
9dB
[a]
[b]
[c]
[d]
[e]
[f]
t
[a]
[b]
[c]
[d]
[e]
[f]
y
65