Using With An Analog Video Unit And Your Computer (Signal Convert Function) - Sony GV-HD700E Operating Manual

Using with an analog video unit and your
computer (Signal convert function)
You can capture pictures from an analog video unit connected to your computer which has the
i.LINK (DV) jack via your VCR.
Connect the VCR to the wall outlet (wall socket) using the supplied AC Adaptor for this
operation (p. 13). You need to install software to capture video signals on your computer, if
necessary. Refer to the instruction manual of your computer and software.
An analog unit with
an S VIDEO jack
(White)
(Red)
An analog unit without
an S VIDEO jack
(Yellow)
(White)
(Red)
: Signal flow
1
Connect the VCR to an analog
video unit and your computer.
2
Set the POWER switch to ON.
3
Press MENU.
The menu screen appears.
(Yellow)
A/V connecting
cable (optional)
S VIDEO cable
(optional)
(Yellow)
4
5
6
(Yellow)
(White) (Red)
A/V connecting
cable (optional)
Select (IN/OUT REC) using
V/v, then press EXEC.
Set [A/VtDV OUT] to [ON].
appears on the screen.
Start playback on the analog
video unit.
i.LINK cable
(optional)
43
Continued ,