Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual page 83

Dubbing only desired scenes
– Digital program editing (on
tapes)
Operation 1: Making the
program
(1) Prepare the power supply and insert the
tape for playback into your (playback)
VCR, and insert a tape for recording into
the other (recording) VCR.
(2) Press MENU to display the menu settings.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select
VIDEO EDIT, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select
TAPE, then press the dial.
(6) Search for the beginning of the first scene
you want to insert using the video
operation buttons, then press X to suspend
playback momentarily.
You can fine-adjust one frame at a time
with c or
(7) Turn the SEL/PUSH EXEC dial to select
MARK, then press the dial, or press MARK
on the Remote Commander.
The IN point of the first program is set, and
the top part of the program mark changes
to light blue.
(8) Search for the end of the first scene you
want to insert using the video operation
buttons, then press X to suspend playback
momentarily.
(9) Turn the SEL/PUSH EXEC dial to select
MARK, then press the dial, or press MARK
on the Remote Commander.
The OUT point of the first program is set,
then the bottom part of the program mark
changes to light blue.
(10) Repeat steps 6 to 9, then set program.
When the program is set, the program mark
changes to light blue.
You can set a maximum of 20 programs.
C.
(1)
(2)
(3)
(4)
(5)
(6)
X
C
(7)
(8)
X
(9)
(10)
c
83