Table of Contents
Advertisement
3.2.6. Onboard Connectors and Headers
Description
CompactPCI Bus
CompactPCI I/O
CompactPCI I/O
DIMM Sockets
Processor Socket
VGA
Serial Port 1
Kontron's
Mezzanine
Ethernet 1, 2
Keyboard/Mouse
CompactFlash
Storage Mezzanine
PMC
Battery
Connect
or
J1- CPCI bus signals and power.
J1/J2
J2 – Additional system slot signals.
J3
Serial Ports 3 and 4, Ethernet 1, power.
Supports PS/2 mouse, serial ports 1 and 2, first IDE
J4/J5
channel, parallel port, keyboard, speaker, floppy
disk, reset, USB, SMBus, and power signals.
Supports 168-pin 64/72-bit DIMMs, up to
J6, J7, J8
RAM.
J9
MXS64GX : Mobile Pentium II / III connector
J12
Supports standard 15-pin DSUB female connector.
J13
Supports standard 9-pin DSUB male connector.
J14, J19
This connector handles PCI bus signals to the mezzanine.
RJ-45 connectors with built-in activity and link
J16/J15
indicators.
Mouse and keyboard signals are combined on a
J17
standard 6-pin DSUB female connector.
This connector is dedicated to the Kontron's
J18
CompactFlash module to support CompactFlash disk.
This connector is implemented to support floppy drive
J19
and hard disk signals.
The PCI Mezzanine Card (PMC) connectors support one
J20, J21
standard PMC device.
BT1
CMOS backup battery connector.
3.11
Installing the Board
Comments
1.5G
B of
Advertisement
Table of Contents
