2.3.
ETHERNET INTERFACES
Both Ethernet controllers reside on the Primary PCI bus.
Each interface supports 10Base-T and 100Base-TX specifications: 10Mbps and 100Mbps
network speeds are automatically detected and switched.
Signal Path
See note on page 1.5.
Related Jumpers
None.
BIOS Settings
Section 4.1.11 Integrated Peripherals: Enable/Disable Ethernet Controller.
2.3.1. Front Plate Configuration
Ethernet 1 and 2 signals are available on front plate connectors only when the board is
ordered for front access.
Activity and link indicators are built in the connector.
2.3
Onboard Features