Table of Contents
Advertisement
Historical (continued)
1.3
May 13, 2002
-
Replace all occurrences of Teknor Applicom Inc or Teknor by
Kontron, Inc.
- Replace all occurrences of Adaptec and Symbios with LSI.
- Replace in section 3.3.3.1 "...from "8MB to 1.5GB of..." by
"... from 32MB to 1.5GB of...
- Correct COM port assignation & location:
J5= COM1 & 2, J3= COM 3 & 4 + Infrared.
- Replace in section E.4 connector J3 RowD Pin14 " SD8" by "
SD8+".
- Remove BMC/IPMI support and references:
Replace in section E.2 / J1 : (BMC+Xlinx)
C17: "IPMB0_SDA" by "I2C_SDA" (From Xlinx)
B17: "IPMB0_SCL" by "I2C_SCL" (From Xlinx)
C17: "IPMB0_PWR" by "Reseved"
Replace in section E.3 / J2 : (BMC)
D19: "IPMB1_SDA" by "Reseved"
C19: "IPMB1_SCL" by "Reseved"
E19: "IPMB1_ALERT" by "Reseved"
Note: Only I2C support is still available instead of IPMI.
Updated Copywright to 2002
Advertisement
Table of Contents
