Table of Contents
Advertisement
3.2.6. Onboard Connectors and Headers
Description
CompactPCI Bus
CompactPCI I/O
CompactPCI I/O
DIMM Sockets
Processor Socket
VGA
Serial Port 1
Kontron's
Mezzanine
Ethernet 1, 2
CompactFlash
Keyboard/Mouse
Storage Mezzanine
PMC
Battery
RESET
Connector
J1- CPCI bus signals and power.
J1/J2
J2 – Additional system slot signals.
J3
Serial Ports 2/3, Ethernet 1, power.
Supports PS/2 mouse, serial ports 1 and 2, first
IDE channel, parallel port, keyboard, speaker,
J4/J5
floppy disk, reset, USB, SMBus, and power
signals.
Supports 168-pin 64/72-bit DIMMs, up to
J14, J15, J16
RAM.
J7, J8
DMXS64GX : Mobile Pentium II / III connector
Supports standard 15-pin DSUB female
J6
connector.
J9
Supports standard 9-pin DSUB male connector.
This connector handles PCI bus signals to the
J11, J18
mezzanine.
RJ-45 connectors with built-in activity and link
J12, J10
indicators.
This connector is dedicated to the Kontron's
J13
CompactFlash module to support CompactFlash disk.
Mouse and keyboard signals are combined on a
J17
standard 6-pin DSUB female connector.
This connector is implemented to support floppy drive
J18
and hard disk signals.
The PCI Mezzanine Card (PMC) connectors support
J20, J21
one standard PMC device.
B1
CMOS backup battery connector.
S1
CMOS Battery connector
3.11
Installing the Board
Comments
1.5G
B of
Advertisement
Table of Contents
