Standard Cmos Setups; Saving & Exiting Operations - Kontron cPCI-MXS64GX Technical Reference Manual

4.1.4 Standard CMOS Setups

Function
Date/Time
Hard Disks
Drive A / Drive B
Video
Halt on
Memory
4.1.5 Saving & Exiting Operations
Use one of the following options available from the Main Menu:
Function
Save & Exit
Exit Without Saving
The current values for each category are displayed. Enter new values through the
keyboard.
Two IDE controllers are defined on the cPCI-MXS64GX board. The Primary and
Secondary controllers can both have two disks: Master Disk or Slave Disk.
Only three settings are available for the hard disk type: Auto, User and None. Type 1
to 46 are not predefined in the system: Use auto-detect or enter the parameters for
the type in the user-defined.
Select the type of floppy disk installed for drive A and drive B.
This option specifies the basic type of display adapter card installed in the system.
This option specifies the type of errors that will stop the system during the BIOS
booting procedure. A message asks that you press F1 to continue or press the
DELETE key to enter Setup. The settings are: All errors, No errors, All but keyboard,
All but diskette, and All but disk/key (default setting).
This display-only option indicates the amount of Base, Extended and other types of
memory installed in the system.
After having modified the BIOS Setup, you can save the configuration in CMOS
RAM and the Flash BIOS, by selecting this option.
This option is used to exit AWARD Setup without saving the configuration to CMOS
RAM or Flash BIOS.
4.5
Description
Description
Software Setups