Table of Contents
Advertisement
cPCI-MXS64GX Technical Reference Manual
Board Specifications (continued)
Supervisory
OS Compatibility
BIOS Features
Mechanical
Power Requirements
Two-stage software programmable Watchdog timer drives NMI on 1
stage and system reset on 2
Programmable CPU temperature monitor/alarm
Power failure/low battery detector
Front Panel LED : IDE activity and SCSI activity, Hot Swap, Ethernet and
link activity
MS-DOS™, Windows® 95/98, Windows®NT, VxWorks™, pSOS™,
QNX™, Linux, Novell, and Solaris Mechanical.
Award Elite BIOS 4.51 in Boot Block Flash with recovery code; save
CMOS in Flash option, and boot from LAN capability.
Auto configuration, extended setup.
CC000-E0000 address blocking; PnP tables.
Setup console redirection to serial port *(VT100 mode) with CMOS setup
access.
Software enable/disable of onboard Ethernet & SCSI; hardware
enable/disable of onboard video
Diskless, keyboardless and videoless operation extensions.
System, video, SCSI, LAN and extension BIOS shadowing.
Programmable bus and I/O speeds, and memory wait states
Advanced security feature for floppy and HDD; DMI & HDD S.M.A.R.T.
support.
Advanced Configuration and Power Interface (ACPI 1.0), Advanced
Power Management (APM 1.2), advanced thermal management (resume,
overheat alarm and auto slow-down), and Green support.
Compliant to IEEE 1101.10, compliant to PICMG2.0 Rev 2.1)
233x160x41 mm / 9.2 x 6.3 x 1.6 in, 6U x 8HP (dual slot) Mechanically
233x160x20.5 mm / 9.2 x 6.3 x 0.8 in;6U x 4HP (single slot) Mechanically
Supply Voltages :
+3.3, +5%-3%,
+12V ±5%
Supply Current:*
+3.3V, 4.5 Amps maximum
+5V,
+12V,
Power Dissipation
cPCI-MXS64GX : 34W maximum
* Mobile Pentium III, 500MHz with 1.5GB SDRAM
A-4
nd
stage.
3.5 Amps maximum
0.1 Amps maximum
st
+5V +5%-3%,
Advertisement
Table of Contents
