Table of Contents
Advertisement
Historical
Rel.
Date
1.0
Jul-2001
1.1
Aug-2001
1.2
Dec-2001
Comments
Initial document release.
N.A.
Cover page
Version 1.2 , December 2001-12-18
Page 1.2, 3.9 and 3.15
Page 1.2
32-bit AGP SVGA CRT controller
Replaced with :
64-bit AGP SVGA CRT controller
16-bit Ultra Wide up to 40Mbps, 8-bit Fast SCSI-2 up
to 10Mbps, 8-bit Ultra SCSI up to 20Mbps (Adaptec
AIC7880).
Replaced with :
16-bit Ultra Wide LVD SCSI up to 80Mbps (Symbios
SYM53C895)
Page 2.8
Section 2.9 – In table, line 2:
Serial port 2 - changed J3 for J5
Serial port 3 - changed J5 for J3
In table, signal path description
Changed J3 for J5.
Added line :
The infrared COM2 signals (COM2_IRRX and
COM2_IRTX) are available at J3 connector.
Page 2.11
In table, signal path description
Removed the line :
In Infrared mode, signals are available through the J3
CPCI I/O connector.
J3 Connector description :
Page 3.11
Changed "2/3/4" for "3 and 4"
Page 3.14
Removed "2" from J3 connector description
Page 3.32
In section 3.5.2.2 0- SCSI Interface table:
Row 1 : Changed SCD for SD
Page 3.34
In section 3.5.2.6 – IDE 1 Interface
Row 2 : Changed "SDD 0-15" for IDE1_0-15
PART 4 title
Section 2 : Removed UPDATING OR RESTORING
Added the note : UPDATING OR RESTORING THE
Page E.5
J4 Row A, pin 5 - DS4- changed for SD4-
J4 Row A, pin 10 - R_SYNC changed for R_HSYNC
Added 700MHz processor speed
THE BIOS IN FLASH
Replaced by : VT100 MODE
BIOS IN FLASH (see the Kontron
WEB site and select the "support"
section)
Advertisement
Table of Contents
