Kontron cPCI-MXS64GX Technical Reference Manual page 93

Power Management Setup (Continued)
BIOS
Option
Defaults
Resume by Ring Dis.
IRQ 8 Break Suspend Dis.
Resume by Alarm Dis.
Reload Global Timer Events:
IRQ[3-7,9-15], NMI Dis.
Primary IDE 0 Dis.
Primary IDE 1 Dis.
Secondary IDE 0 Dis.
Secondary IDE 1 Dis.
Floppy Disk Dis.
Serial Port
Parallel Port Dis.
Setup Possible
Defaults Settings
En. En./Dis.
En. En./Dis.
Dis. En./Dis.
En. En./Dis.
En. En./Dis.
En. En./Dis.
En. En./Dis.
En. En./Dis.
En. En./Dis.
En. En. En./Dis.
En. En./Dis.
When Enabled and a modem is connected to a serial port, allows a
modem ring to re-activate the CPU when in Suspend mode.
When Enabled, the RTC alarm interrupt is monitored to allow an
interrupt to awaken the system when in Doze, Standby or Suspend
Mode.
When Enabled, allows setup of a time to re-activate the CPU when in
Suspend mode with the options Date (of Month) Alarm and Time
(hh:mm:ss) Alarm.
Note: The IRQ 8 Break Suspend option in this setup screen must
be Enabled to use the RTC alarm.
When any of the options below is Enabled, monitoring of the interrupt
will occur to allow an interrupt to awaken the system when in Doze,
Standby or Suspend Mode.
4.11
Software Setups
Description