Unipulse F350 Operation Manual page 7

Statement of Conformation to EC Directives
Statement of Conformation to EC Directives
Statement of Conformation to EC Directives
* The F350 is a CE-compliant product. For use, observe the following.
The F350 Digital Indicator is a CE-marked EC-Directive-conforming product
(by the Council of the European Union).
- Low Voltage Directive
- EMC Directive
When installing, attention should be given to the following.
1. Since the F350 is defined as open type (built-in equipment), be sure to use it as installed
and fixed to a panel, etc.
2. The power cable attached to this product as standard can be used with 100V AC power in
Japan.(Nominal rated voltage: 125V AC)
For using this product in a country outside Japan, use a power cable certified in that
country.
3. For cables other than the power cable (sensor, external input/output, option), use shielded
cables.
Also, mount the attached ferrite core to the strain gauge sensor cable.
Point
The combination of the main unit of the F350 and a lightning surge protector
conforms to EN61000-4-5 (lightning surge immunity) in the EMC Directives.
Refer to " Connection of a Lightning Surge Protector (Power Cable)" on page VII
for information regarding lightning surge protector connection.
VI
VI
（ ）
Overvoltage category II
EN61010-1:2010
Pollution degree 2
EN62311:2008 (test distance: 0cm)
EN61326-1:2006
EN55011:2009, A1:2010 Group1, ClassA
EN61000-3-2:2006, A1:2009, A2:2009
EN61000-3-3:2008
EN61000-4-2:2009
EN61000-4-3:2006, A1:2008, A2:2010
EN61000-4-4:2004, A1:2010
EN61000-4-5:2006
EN61000-4-6:2009
EN61000-4-8:2010
EN61000-4-11:2004