Adjustment By Fixed Output - Unipulse F350 Operation Manual

■Adjustment by fixed output

Make output adjustment on the adjustment screen appearing after selecting each fixed output by
D/A output data select setting and pressing
While monitoring the output value, make fine adjustment of the output with
press
◇Zero fixed output
H I
H I
◇Full fixed output
H I
H I
* Keeping on pressing
* The adjustable range of voltage output is approximately ±2.0V, and that of current output is
approximately ±1.6mA.
* Press
* Press
* By initializing the system settings, the adjusted value is cleared to go back to 0%.
81
② Set "Full scale value."
Press once. ⇒ "Full scale value" is
displayed.
Press , and the highest digit blinks.
Input the setting value with
* For inputting a negative sign, press
Press to validate it.
3.
Press twice to go back to the indicated value display.
ESC
to validate it, so that the adjusted value (%) is registered.
LO PEAK HOLD
OK
Ch1 Ch 2
H I LO
LO
Zero scale adjusted value
LO PEAK HOLD
OK
Ch1 Ch 2
H I LO
LO
Full scale adjusted value
to bring the adjusted value back to the central point (0%).
ZERO
to stop adjustment and go back to the indicated value display screen.
ESC
, and move to the lower digit with
.
Adjust with the keys.
Adjust with the keys.
results in continuous operation.
9 OPTION INTERFACE
H I OK LO PEAK
Ch1 Ch 2
H I LO
.
H I LO PEAK HOLD
OK
Ch1 Ch 2
H I H I LO
LO
LO PEAK HOLD
H I OK
Ch1 Ch 2
H I LO
H I LO
HOLD
H I LO
.
, and
Chapter
9
81