Zero/Full Scale Setting - Unipulse F350 Operation Manual

9 OPTION INTERFACE
◇ Output data select setting method

■Zero/Full scale setting

Zero scale
Full scale
《Setting value》
* Set so that the Zero scale value < Full scale value.
◇ Zero/Full scale setting method
Chapter
9
80
80
1.
Select setting mode 5.
Press
→
FNC
2.
Set "Output data select."
Press once. ⇒ "Output data select" is
displayed.
Press , and present set value blinks.
Input the setting value with
（Initial value：0）
Press to validate it.
3.
Press twice to go back to the indicated value display.
ESC
Set the indicated value to output 0V for voltage output, and 4mA for
current output.
Set the indicated value to output 10V for voltage output, and 20mA for
current output.
Zero/Full scale value
1.
Select setting mode 5.
Press →
FNC
2.
Set "Zero scale value," and "Full scale value."
① Set "Zero scale value."
Press twice. ⇒ "Zero scale value" is
displayed.
Press , and the highest digit blinks.
Input the setting value with
* For inputting a negative sign, press
Press to validate it.
four times.
.
-99999～99999
four times.
, and move to the lower digit with
.
Ch1 Ch 2
H I LO H I LO
H I OK LO PEAK HOLD
Ch1 Ch 2
H I LO H I LO
Ch1 Ch 2
H I LO
H I LO
LO
H I OK PEAK HOLD
Ch1 Ch 2
H I LO H I LO
.