Installation - Unipulse F350 Operation Manual

2 INSTALLATION & CONNECTION
2-1.

Installation

To install the F350 into a control panel, use the following procedure.
Chapter
2
8
8
1.
Make a hole in the panel according to
the panel-cut dimensions.
2.
Remove the screws (two), and remove
the guide rails from both sides.
* Do not use other screws than those installed to
the F350 body.
3.
Fit in the F350 from the front of the panel.
4.
Install from the rear the guide rails having
been removed from both sides in Step 2,
and fix them with the screws (two).
+1
92mm
– 0
Panel-cut
dimensions
+1
92mm
Panel thickness
0 –
1.6 to 3.2mm