Near Zero; Near Zero Setting Method - Unipulse F350 Operation Manual

6-4.

Near Zero

This function is to detect that the indicated value (calculated value) is Near Zero.
Near Zero ON：
Near Zero OFFF：
≪Setting value≫
0～99999
Point

■Near Zero setting method

1.
2.
3.
Point
47
|Calculated value| ≦ Setting value of Near Zero
|Calculated value| ＞ Setting value of Near Zero
Near Zero ON/OFF is closely related to the SI/F print (stable value) function and
calculation comparison timing.
For details, see "6-5. Calculation comparison timing" on page 48, and "■ SI/F
print" on page 62.
Select setting mode1.
Press once.
FNC
Set "Near Zero."
Press twice ⇒ "Near Zero" is displayed.
Press , and the highest digit blinks.
Input the setting value with
Move to the lower digits with
Press to validate it.
Press twice to go back to the indicated value display.
ESC
Near Zero operates by absolute value.
6 EXPLANATION OF COMPARISON FUNCTIONS
.
.（Initial value：100）
Ch1 Ch 2
H I H I LO
LO
H I OK LO PEAK HOLD
Ch1 Ch 2
H I LO H I LO
47
Chapter
6