Zero Tracking; Zero Tracking Setting Method - Unipulse F350 Operation Manual

5 EXPLANATION OF INDICATED- VALUE-RELATED FUNCTIONS
5-6.

Zero Tracking

This function is to automatically track and correct gradual changes in the zero point due to drifts
(phenomenon in which outputs fluctuate slowly due to temperature change or change with time),
etc.
≪Setting value≫

■Zero Tracking setting method

Chapter
5
40
40
Zero Tracking (time)
Zero Tracking (range)
1.
Select setting mode 3.
Press
→
FNC
2.
Set "Zero Tracking."
Press twice. ⇒ " Zero Tracking " is
displayed.
*It changes according to
setting of ch2.
Press , and the highest digit blinks.
①Set " Zero Tracking (time)."
Input the setting value with
Move to the lower digits with
（Initial value: 0.0）
②Set " Zero Tracking (rande)."
Input the setting value with
Move to the lower digits with
Press to validate it.
3.
Press twice to go back to the indicated value display.
ESC
0.0～9.9 [second]
00～99 [count]
twice.
to execute the
.
.
.
.（Initial value: 00）
Ch1 Ch 2
H I LO H I LO
H I OK LO PEAK HOLD
Ch1 Ch 2
H I LO H I LO
Selected ch display
setting value
《 》
.
-
0 0 0 0
Range
00 ～ 99
Time
【count】
0.0 ～ 9.9
【second】