Table of Contents
Advertisement
Setting Up the Computer for IP Communication
Follow these steps to set up communication between your computer and the PC1 using
Windows 2000, Windows XP, or Windows 7.
NOTE: The procedure and illustrations in this section are for Windows XP. For other
Windows versions, the screens may appear slightly different.
1.
Open the Network Connections page as follows:
a.
From the
b.
From the
2.
Right-click
Figure 12.
3.
On the
page), select
Internet Protocol (TCP/IP)
user manual or the Windows online help system for the procedure).
menu, select
Start
My Network Places
side-bar menu, select
Network Tasks
Local Area Connection
Network Connections Window
Local Area Connection Properties
Internet Protocol (TCP/IP)
is not on the list, you must install it (see the Windows
.
View Network
, then select
.
Properties
window (see
figure 13
, then click the
Properties
IPL T PC1 • HTML Configuration and Control
connections.
on the next
button. If
18
Advertisement
Table of Contents
