Finding A Dante Device Ip Address; Identifying A Physical Dante Device - Extron electronics AXI 02 AT User Manual

Finding a Dante Device IP Address

To find the IP address of a Dante device, the name of the device is needed (see
the AXI 02 AT in Dante Controller
NOTE: If the AXI has not been renamed, its default name consists of the product name
followed by a hyphen, plus the last 6 characters of the Dante device MAC address
(for example, AXI02-0a690b).
1. Open Dante Controller.
On the Dante Controller-Network View screen, click the Device Info tab (see
2.
figure 25,
On the Device Info page, locate the name of the AXI device in the Device Name
3.
column (
example below, the IP address for the connected AXI 02 AT is 192.168.11.181.
Figure 25.

Identifying a Physical Dante Device

If an AXI 02 AT has not been renamed (see
on page 18) and the MAC address cannot be located to identify the device within Dante
Controller, it is possible to physically identify a device using the software.
1. On the Dante Controller - Network View screen,
select Device>Device View from the toolbar. The Dante
Controller - Device View dialog box opens.
2. Select a device from the (Select a Dante Device...)
drop-down list. The Device View dialog box populates with information from the
selected AXI.
3. To identify the AXI, click the Eye icon (see the figure to the right) on the
Device View screen toolbar. The power LED on the front panel of the selected
device blinks amber (see figure 4,
on page 18).
).
1
). The IP address is located in the Primary Address column (
2
Device Info Page
1
Renaming the AXI 02 AT in Dante Controller
on page 5).
AXI 02 AT • Dante Controller
Renaming
). In the
3
22