Extron electronics IP Link Series User Manual page 62

Command
Web Browser-specific Commands
Read response from last URL cmd
NOTE: An asterisk (*) after a version number indicates the version currently running. Question marks (?.??) indicate that only the
factory firmware version is loaded. A caret (^) indicates the firmware version that should be running; however, a mode 1 reset was
executed and the factory default firmware version is currently loaded. An exclamation point (!) indicates corrupted firmware.
Query firmware version
Query verbose version information
Query firmware information
Query bootstrap version
Query factory firmware version
Query updated firmware version
Request interface part number
Request model name
Request model description
Example:
Mail Server Setup Commands
Set mail server IP, unit domain
name, and SMTP authentication
View mail server IP, unit domain
name, and SMTP authentication
Set mail server IP and unit domain
name
24
View mail server IP and unit domain
name
X1! = Version (typically listed to two decimal places, that is, n.nn).
KEY:
X1$
= IP address (nnn.nnn.nnn.nnn). Leading zeros in each of four fields are optional in setting values, and they are
suppressed in returned values.
X1%
= E-mail domain name (for example: extron.com)
X7#
= E-mail account user name. Maximum length is 31 characters. This parameter is optional; commas cannot be used as
placeholders for it. If it is omitted from an issued command, any existing user account name is cleared.
X7$ = E-mail account password. Maximum length is 31 characters. This parameter is optional; commas cannot be used as
placeholders for it. If it is omitted from an issued command, any existing user account password is cleared.
ASCII (Telnet)
(Host to Switcher)
E UB }
Q
Verbose modes 2 and 3
0Q
Verbose modes 2 and 3
1Q
Verbose modes 2 and 3
2Q
Verbose modes 2 and 3
3Q
|
Verbose modes 2 and 3
4Q
Verbose modes 2 and 3
N
Verbose modes 2 and 3
1I
Verbose modes 2 and 3
2I
2I
Verbose modes 2 and 3
E X1$ , X1% , X7# , X7$ CM }
24
E CM }
24
E X1$ , X1% CM }
E CM }
URL Encoded (web)
(Host to Switcher)
W UB |
Q
0Q
1Q
2Q
3Q
4Q
N
1I
2I
2I
W X1$ %2C X1% %2C X7# %2C X7$
W CM |
W X1$ %2C X1% CM |
W CM |
IPL T PC1 • SIS Programming and Control
Response
(Switcher to Host)
Response from command ]
X1! ]
Ver01* X1! ]
Sum of responses from 2Q, 3Q,
and 4Q ]
Ver00* X1! sum of responses
from 2Q, 3Q, and 4Q ]
X1! ]
Ver01* X1!]
X1! ]
Ver02* X1!]
X1! plus (web version – model –
UL – date and time) ]
Ver03* X1! plus (web version
– model – UL – date and time)
X1! plus (web version – model –
UL – date and time) ]
Ver04* X1! plus (web version
– model – UL – date and time)
60-544-10 or 60-544-20 ]
Pno 60-544-10 or
Pno 60-544-20 ]
IPL T PC1 or IPL T PC1i ]
inf01*IPL T PC1 ]
Brief product description
One 220 VAC Switched AC
Receptacle,
One Bi-Directional Serial
Port [RS-232],
One IR Port, One Contact Input
Port ]
inf02*brief product
description ]
CM |
Ipm• X1$ , X1% , X7# , X7$ ]
X1$ , X1% , X7# , X7$ ]
Ipm• X1$ , X1% ]
X1$ , X1% ]
]
]
]
54