Extron electronics IP Link Series User Manual page 40

Upgrading firmware
The page lets you browse to locate and upload a new version of
Firmware Upgrade
firmware for your unit. The uploaded file must have the file extension
NOTE: The PC1 uses the same firmware as the IPL T PC1. However, it does not accept
other firmware files, such as the
To find out the version of firmware that is currently loaded on your PC1, see
Viewing the System Status
Downloading the firmware from the web
To obtain the firmware file to load to your PC1:
1. Visit www.extron.com.
2.
Click the tab.
Download
3. On the
Download Center
4. On the line at the top of the
Archives
5. On the next page that appears, click the
or IPL T PC1i line.
6. Fill in the required information on the next
button.
Download IPLTPC1
7. Click on the
Run File Download
8. Follow the instructions on the installation wizard screens. The new firmware file is placed
on your computer internal disk.
Updating the firmware
To upload a new version of firmware:
1. On the sidebar menu of the
page is displayed, showing the version of firmware that is currently
Firmware Upgrade
loaded (see figure 24,
1
Figure 24. Firmware Upgrade Page
files for the IP Link S Series.
.s19
on page 23.
page, click the
Firmware
page, click the letter
Firmware
link at the right end of the IPL T PC1
Download
Download Center
window.
page, click
Configuration
).
IPL T PC1 • HTML Configuration and Control
.
.S19
Firmware
link in the center of the page.
.
I
page, and click the
. The
Firmware Upgrade
in
32