Table of Contents
Advertisement
The
System Status
•
System Description — Includes product model, port and receptacle description, part
number, firmware version, and the current date and time.
•
IP Settings — Displays the unit name, DHCP status, IP address, gateway address,
subnet mask, and the MAC address.
Port, AC, and Executive Mode Settings — Shows settings for the RS-232 and
•
Contact Input ports, name and On or Off status for the AC receptacle, and whether lock
mode (executive mode) is on or off.
Current Schedule — Shows the schedule currently in place for powering the output
•
device on and off, and for enabling and disabling executive mode.
Using the Configuration Pages
To access the Configuration pages, select the
pages that can be accessed from the
menu at the left of the page. These pages are described in the following sections.
Specifying system settings
On the System Settings page, you can set the date and time, change the IP address
information for the PC1, and enable or disable lock mode.
Figure 18.
1.
On the
left edge of the screen. The
factory default information for your PC1 or the settings submitted most recently.
2.
Enter your new information in the IP Settings section, or select the date and time from
the menus in the
page displays information in the following categories:
Configuration
System Settings Screen on the Configuration Page
page, select
Configuration
System Settings
Date/Time Settings
tab. There are seven web
Configuration
page. They are listed in the sidebar
from the sidebar menu at the
System Settings
page appears, displaying either the
section, as described in the following sections.
IPL T PC1 • HTML Configuration and Control
24
Advertisement
Table of Contents
